Main body complete, I had to redo the bolt, by printing pg 1-2 at 95%. This made part 7 fit perfectly into the frame however parts 2,5,6 were still too big, Icut down 2,6 to fit into the bolt housing which causes another problem this makes the bolt too small for the bolt carrier, so keeping part 5 at it's 95% size this fits the carrier, then just gluing the main part of the bolt to that.
There's alot of guess work involved, several parts must be glued inverted (color side in) every thing must be cut folded and test fitted before gluing.
I made some mistakes on the detailing pieces on the frame, uncolored places on the frame should be cut out, parts folded inverted and glued on the inside, I didn't catch this untill building the bottom part of frame, in which case I did it correctly, it makes for alot more exposed paper edges needing coloring, I think gluing them on the outside looks better.
Any way.... starting on the grip now.