Loco Headlights

Discussion in 'DCC & Electronics' started by colin, Dec 30, 2005.

  1. colin

    colin New Member

    I'm running the prodigy advance system. The headlights on some of my locos are on for the even speeds and turn off for the odd speed #'s. Whats with this? For one of my consists, one loco is OK but the other ones headlight turns off when the speed is an odd #. Any advice. Thanks; Colin
  2. rksstl

    rksstl Member

    Hi Colin, try resetting the decoder in the offending locos. cv08 008, if this doesn't work let me know. I had one loco do something similar.
  3. knewsom

    knewsom New Member

    This can happen when the decoder is set for 14 speed steps and the command station is set to 28 or 128 as well. Check to make sure the speed steps are synchronized between the decode and PA.
  4. colin

    colin New Member

    Thanks Guys; CV29 was set at 48; Reset it to default of 34 and it works great.
    Thanks again...........Colin

Share This Page