SD.Kfz 250/3 Greif GPM 1:16

[josve]

Some progress made....
The second front seat,the "mailbox" on its back, the back of the bench and the cylinder besides the front seat that maybe is a gazmask or something.
Also glued the outer skin on the right side.





And the outside

 

[Larry Marshall]

You're certainly using your vacation time to good adantage. Lots of progress on a beautiful model. Thanks for sharing the progress.

Cheers --- Larry

 

[josve]

Started to work again today, so now something also can be done on the Kübel...

Jerrycans or can.....One done, five to go

 

[josve]

Started to work again today, so now something also can be done on the Kübel...

Jerrycans or can.....One done, five to go

 

[josve]

The supporters for the wheels was made today.

First the drawing and the parts to be used.


The assembly of the part is done without reinforcement of any kind....so very careful handling here


Some other parts involved, finished , and the rear "thing"


And here the supporters are mounted.


The inside of the vehicle are finished also (almost) but a few ittems have to wait until the upper part is mounted.

 

[josve]

The supporters for the wheels was made today.

First the drawing and the parts to be used.


The assembly of the part is done without reinforcement of any kind....so very careful handling here


Some other parts involved, finished , and the rear "thing"


And here the supporters are mounted.


The inside of the vehicle are finished also (almost) but a few ittems have to wait until the upper part is mounted.

 

[josve]

Starting to make the "windows" today.They are going to be movable, and the parts and holes are really small.....even on this 1:16 scale.
Holes are 0,6mm and the rods used are 0,5mm

The drawing and the parts to be used


I also put in a glass instad of the printed one.

 

[josve]

Starting to make the "windows" today.They are going to be movable, and the parts and holes are really small.....even on this 1:16 scale.
Holes are 0,6mm and the rods used are 0,5mm

The drawing and the parts to be used


I also put in a glass instad of the printed one.

 

[josve]

I have started on the upper part of the chassis.
I replaced the printed "net" on the ventilation holes with some painted gaz.
The inside is almost finished.The part 23 is the gunholder and will be put in when it's all assembled.
And working on finishing the "windows" in between....

 

[josve]

I have started on the upper part of the chassis.
I replaced the printed "net" on the ventilation holes with some painted gaz.
The inside is almost finished.The part 23 is the gunholder and will be put in when it's all assembled.
And working on finishing the "windows" in between....

 

[josve]

More windows....
A lot of small parts....easy to mess up...and I did several places.

 

[josve]

More windows....
A lot of small parts....easy to mess up...and I did several places.

 

[GT5500]

Can I please ask you to stop building such amazing armour models, they look better then most plastic kits I have seen. Great job, keep ploughing :-D

 

[GT5500]

Can I please ask you to stop building such amazing armour models, they look better then most plastic kits I have seen. Great job, keep ploughing :-D

 

[josve]

I think I have to dissapoint you
I'm not going to stop....I have a pile of models waiting, and it might take a lifetime to get them all built .... and I don't stop ordering new ones either...
so the pile is rising
The 1:16 scale is really fun to build, so I think I will continue this path for a while.

 

[josve]

I think I have to dissapoint you
I'm not going to stop....I have a pile of models waiting, and it might take a lifetime to get them all built .... and I don't stop ordering new ones either...
so the pile is rising
The 1:16 scale is really fun to build, so I think I will continue this path for a while.

 

[josve]

The upper hull.....went so and so I think...I got it mounted and I'm not quite happy about the result, but it have to be ok since it now is too late to do something about it.So don't look to closely ok!

 

[josve]

The upper hull.....went so and so I think...I got it mounted and I'm not quite happy about the result, but it have to be ok since it now is too late to do something about it.So don't look to closely ok!

 

[josve]

Made a hatch in the front today.

 

[PakMan]

josve -

all i can say is that this looks AWESOME! again, it's hard to believe that this is made out of cardstock. this is some really inspiring work!!

- mike