Yamaha YZF-R1M Ultra Realistic Model
- Thread starter retunga
- Start date
Hi All
At last I have completed the Engine
Next part is the Radiator.
R
At last I have completed the Engine
Next part is the Radiator.
R
Update Time !!
I have now completed section 3 of the model build
So Engine, Radiator and exhaust systems are now done.
First the radiator
The Exhaust System.
All the parts that are built in section 3
Now section 4 of 5. Section 4 is the frame and rear suspension arm.
R
I have now completed section 3 of the model build
So Engine, Radiator and exhaust systems are now done.
First the radiator
The Exhaust System.
All the parts that are built in section 3
Now section 4 of 5. Section 4 is the frame and rear suspension arm.
R
Hi all
update Time, I have now completed the first part of the frame of the bike, the reason for taking so long with this that I want to get this part 100% spot on straight, When I built the V-Max the frame was a bit out and I had to do a lot small mods to the frame for it work out as I did not build carefully. The next part of the frame is going to also take a bit time to get it 100% spot on.
But for now the photos of the Bike frame.
Enjoy
R
update Time, I have now completed the first part of the frame of the bike, the reason for taking so long with this that I want to get this part 100% spot on straight, When I built the V-Max the frame was a bit out and I had to do a lot small mods to the frame for it work out as I did not build carefully. The next part of the frame is going to also take a bit time to get it 100% spot on.
But for now the photos of the Bike frame.
Enjoy
R
Hi all
I have now finished the rear part of the frame of the bike, I have had to do a quick rebuild patch on the main frame as I had one part the wrong way but now it is fixed.
Enjoy
R
I have now finished the rear part of the frame of the bike, I have had to do a quick rebuild patch on the main frame as I had one part the wrong way but now it is fixed.
Enjoy
R
Hi All
The next part of the bike frame, the feet pegs.
The Frame work continues.
R
The next part of the bike frame, the feet pegs.
The Frame work continues.
R
Very nice job!! and that thing is HUGE!!! You might be able to sell it to a Shriner to ride in the parades...I was just comparing your view to my own keyboard....wow!!
HI All
update time, I have now completed the final part of section 4, the rear wheel arm. This now completes section 1 through to 4, now it is just section 5 which is the wheels and seat and few extra parts before doing the final assembly.
Enjoy the photos.
All the parts that make up section 4.
Enjoy
R
update time, I have now completed the final part of section 4, the rear wheel arm. This now completes section 1 through to 4, now it is just section 5 which is the wheels and seat and few extra parts before doing the final assembly.
Enjoy the photos.
All the parts that make up section 4.
Enjoy
R
- Apr 5, 2013
- 13,499
- 9,551
- 228
That is one beautiful collection of parts!!
I was a Yamaha Parts Manager for 2.5 years, at a dealership in Connecticut. We had a frame straightening machine. Most of the bike were so crooked from the factory, we stopped checking them. It was too time consuming, and the riders didn't seem too notice it. Yamaha was the worst, Suzuki's were nearly always dead on. I truly think it was the way they packed them. I had an XJ750 Seca as my daily rider, plus an XS1100, a huge monstrous bike. My brother in law had a Kawasaki dealership. That 6 cylinder water cool 1300 c.c. bike they made back then felt like you were sitting on half of a car.
I was a Yamaha Parts Manager for 2.5 years, at a dealership in Connecticut. We had a frame straightening machine. Most of the bike were so crooked from the factory, we stopped checking them. It was too time consuming, and the riders didn't seem too notice it. Yamaha was the worst, Suzuki's were nearly always dead on. I truly think it was the way they packed them. I had an XJ750 Seca as my daily rider, plus an XS1100, a huge monstrous bike. My brother in law had a Kawasaki dealership. That 6 cylinder water cool 1300 c.c. bike they made back then felt like you were sitting on half of a car.
HI All
update time, I have now completed the final part of section 4, the rear wheel arm. This now completes section 1 through to 4, now it is just section 5 which is the wheels and seat and few extra parts before doing the final assembly.
Enjoy the photos.
All the parts that make up section 4.
Enjoy
R
Dear Retunga, to follow this thread is realy something! Congratulations for your progressive work.
Hi All
After one rebuild of a part, I have now finished tall section of the bike !!!!
All that is now left to finish building is the wheels, Then final assembly (YIPPIE)
Here is the photos of the finished parts.
Roll on wheels
R
After one rebuild of a part, I have now finished tall section of the bike !!!!
All that is now left to finish building is the wheels, Then final assembly (YIPPIE)
Here is the photos of the finished parts.
Roll on wheels
R
Hi All
Some sad news, I was 99% complete with the model and left my study for 2 minutes and my 3 year old decided to "lets help daddy finish his model". Well it died a painful death of a 3 old year old. At this moment in time I am so distort that I am just considering letting it just be....
Anyone else will who has started will find this build to be quite a good one.
Sorry to all who were hoping for finished pictures...
R
Some sad news, I was 99% complete with the model and left my study for 2 minutes and my 3 year old decided to "lets help daddy finish his model". Well it died a painful death of a 3 old year old. At this moment in time I am so distort that I am just considering letting it just be....
Anyone else will who has started will find this build to be quite a good one.
Sorry to all who were hoping for finished pictures...
R