Model of meritorious mention Sulaco 1:430 scale

Marco Scheloske

Active Member
Hi fellows,

since December 2010 I'm building Jan Rukr's amazing 1:430 SULACO papermodel (http://www.sulaco.cz/), and I thought it is time to share some pictures, now that I finished the bow section (which is 1 meter long!). The antennas are all strengthend with carbon profiles, so they won't bent over time. Here we go:

P1040106.jpg


P1040099.jpg


P1040096.jpg


P1040091.jpg


P1040094.jpg


P1040109.jpg


Meanwhile I started the middle section. I LOVE this papermodel!
 

lehcyfer

Member
I LOVE this papermodel!

And it is visible. Very nice, clean model. Great job!

I plan to make it too - when all the parts will be available.
The printing alone will be a big job by itself...
 

Marco Scheloske

Active Member
The printing alone will be a big job by itself...

Indeed. I have the luck to be the site manager of a small printing company, and my parts are digital offset printed. It is very good to be able to use different weights of paper for the parts, so I can choose the best for each part (250 g/sqm for parts which form the structure, 160 or 120 g/sqm for parts that are just "eyecandy" and have nothing to do with the structural integrity). And because our machine is being calibrated before each print the color of the parts is the same, regardless when I print them.
 
Z

Zathros

Wow, excellent workmanship. Nice paper advantage you have too! :)
 

lehcyfer

Member
Ahh. I thought about digital offset, but wondered about cost - perhaps I'll be able to convince a few friends to order a printout together...
 

F131

F131
Indeed. I have the luck to be the site manager of a small printing company, and my parts are digital offset printed. It is very good to be able to use different weights of paper for the parts, so I can choose the best for each part (250 g/sqm for parts which form the structure, 160 or 120 g/sqm for parts that are just "eyecandy" and have nothing to do with the structural integrity). And because our machine is being calibrated before each print the color of the parts is the same, regardless when I print them.

Lucky *******!!!!! Oh, great job on the model!
 

Marco Scheloske

Active Member
Time for anther update about my SULACO buildup. I finished all parts that are online: The middle section is complete, the guns are complete (but not mounted yet, they are so fragile that I will mount them as the very last parts), the pylon and the main engine. Here are the pictures... and I hope that Jan will upload new parts soon:

P1040161.jpg


P1040227.jpg


P1040279.jpg


P1040281.jpg


P1040289.jpg


P1040322.jpg


P1040323.jpg


P1040324.jpg
 
Z

Zathros

Excellent looking sub assemblies there. They all look so nice and square. The engine nozzle is excellent also! The nose piece with the antennae array sticking out of the wall makes for a great piece on it's own! :)
 

Marco Scheloske

Active Member
Excellent looking sub assemblies there. They all look so nice and square.

Thanks!

I'm especially taking my time when building the "frame boxes" of the ship. It depends on them wether or not the complete assembly will look straight. Using square steel angles of different sizes I check the parts fit countless times while the glue sets... that way I need very long for a simple box, but the whole project is not a quick one, and the model will be shown on several exhibitions here in Germany once it is done, so I will be sure to do the best I can with it.
 
Z

Zathros

I sincerely think with the right lighting and cameras, the most impressive space flight scenes could be created. :)
 

Millenniumfalsehood

Well-Known Member
Have you ever tried using a machinist's square? It's got this big weighted end that makes it perfect for getting absolutely square joints and making sure the assembly is true. I am in love with mine; it's an essential item for doing work like this that is dependant on a near-perfect 90* angle on every part.
 
Z

Zathros

At Sikorsky's, any machinist square off more that .0005" was not considered suitable for use on the factory floor, and was then considered a carpenters square.

An Excellent tool for forming extremely sharp angles, I most definitely agree! :)
 

Marco Scheloske

Active Member
Today I mounted the pylon under the middle hull - with the help of magnets!

That way it is removable and the model will be much easier to transport than a fully glued-on version:

P1040436.jpg


P1040435.jpg


P1040433.jpg


P1040434.jpg
 
Top