Outland Shuttle Build

Kjev

Active Member
OT, but that DEFINITELY ranks you in the "WAY COOL DAD" category!

Did you design the armor yourself?
 

DaDragon

New Member
I agree.

You've got to be a cool dad! :thumb:
I second that and wish I'd done something along the same lines for my kids now aged 27 and 22! At least I got to give them a good grounding in reality so they keep their heads when all around them are loosing theirs!

To Hot4Darmat and all who read this: have a great holiday and the best of good wishes for 2009. :wave:

Graham. :killer:
 
Things got real busy in RL, and I got a little discouraged after a child-related destruction incident. Fortunately the damage wasn't too bad, and most of the ripped off pieces were relatively intact or easily re-buildable. I guess its my own danged fault for leaving it to sit for so long, and it was stored below the 7 ft high level. Here's the damage that had this project on hold for awhile.
 

Attachments

  • Damaged1.jpg
    Damaged1.jpg
    46.5 KB · Views: 18
  • Damaged2.jpg
    Damaged2.jpg
    56.7 KB · Views: 12
I finally made some progress on paneling and details that were missing, mostly on the ends and upper surface. This process of adding details could go on and on, but at this point I'm going to call the Shuttle "almost done". It needs 2 more antenna arrays, both on the upper surface then it truly is done. I've already started cleaning up the parts pages, and hopefully will have some rudimentary instructions ready. Hopefully this project will be ready for download and release before another year elapses. Here are some shots of the Outland Shuttle in its "almost done" form.
 

Attachments

  • AlmostDone1.jpg
    AlmostDone1.jpg
    52.2 KB · Views: 20
  • AlmostDone2.jpg
    AlmostDone2.jpg
    60.7 KB · Views: 18
  • AlmostDone3.jpg
    AlmostDone3.jpg
    56 KB · Views: 12
  • AlmostDone4.jpg
    AlmostDone4.jpg
    55.4 KB · Views: 16
  • AlmostDone5.jpg
    AlmostDone5.jpg
    55.1 KB · Views: 16
  • AlmostDone6.jpg
    AlmostDone6.jpg
    50.1 KB · Views: 25
Hot4Darmat, I am truly impressed with your work and dedication!:thumb: I've been following your thread since I became a member and have waited in anticipation for the finale! Very nicely done!
 
Thanks very much for the kind words and encouragement. It really means alot. Just so you all know how FAR from accurate this model is (I keep saying its "an interpretation" of the original, because I lack the skills, artistry and patience to make it more canon), here are a few of the shots I used for reference, from Mr. Bowers' site.

Like I said, the studio model was INSANELY detailed with greeblies, and one could spend many many hours adding all the layers of detailing if motivated.
 

Attachments

  • outlnd06.JPG
    outlnd06.JPG
    28.4 KB · Views: 280
  • outlnd07.JPG
    outlnd07.JPG
    28.3 KB · Views: 18
  • outlnd09.JPG
    outlnd09.JPG
    35.7 KB · Views: 12
  • outlnd11.JPG
    outlnd11.JPG
    27.9 KB · Views: 284

Gixergs

Senior Member
I think Mr Bower will be very honoured by your " Interpretation " A stunning piece of artistic engineering.
 

dhanners

Active Member
I think Mr Bower will be very honoured by your " Interpretation " A stunning piece of artistic engineering.

I concur. Plus, keep in mind that this model (when it is finally available) will be the first-ever model of this vehicle. So the fact that you've tackled something that nobody else has tried -- and in card, no less -- says something about your skill and determination. And the end result is pretty darn impressive.
 
lol.

After this I have about 5 design projects in varying states of incompletion that need to be finished, plus a dozen nice already-started models in my building cue (mostly sci-fi, armour and kitbash projects). I'd also love to build the big 3' Galactica, or Rukr's Sulaco, or uhu's Discovery, or build myself a rag tag fleet, or Gearz Nostromo, or.....

The Cygnus, while very cool, will, most assuredly, not be one of these projects.:mrgreen:

I'll leave that to some toothpick modeler with obsessive and perseverative tendencies and lots of time on their hands.
 
Sorry. Didn't mean to send you into palpitations. Gearz' Nostromo is another project "in development" like his Betty that may be some time yet. I just check in on its progress, like I do those other ones, wishing and hoping.....

The thread where it got discussed is here:

http://www.zealot.com/forum/showthread.php?t=156812

Gearz? Where are you buddy? Chime in here and give us some happy news!
 

DaDragon

New Member
Hi Hot4Darmat,

Sorry, but lost the plot (and the thread) a little for the past couple of months; s#!t happens . . .and it certainly did!!! Things are better now, in fact the little lady (she's 5 feet and I'm 6 feet 1 sign1) and I have come out slightly ahead . . .for the moment anyway!

Sorry to hear about your "child-related destruction incident"! Been there, done that far too many times :cry: and can assure you that 7' would not have been high enough by a long shot!!! The recovery however has been nothing short of magnificent :thumb: :thumb: :thumb: and the shuttle is looking just awesome!

Just so you all know how FAR from accurate this model is (I keep saying its "an interpretation" of the original, because I lack the skills, artistry and patience to make it more canon)

Sorry to be blunt, but that's just plain (and smelly) BS:
  1. It doesn't matter as long as looks the part and you've no worries whatsoever there!
  2. The studio model was built like a tank and used a ton of plastic models for detailing: card wouldn't take the weight! If people want to superdetail, let them. I don't feel the need from what I've seen, neither will the vast majority of builders 'cos its bl**$y marvelous as is!
  3. You're too close to be objective. I didn't build anything for over 10 years because I thought I "lacked the skills, artistry and patience" to meet my own overinflated standards wall1 (and they were vastly overinflated . . .a little like me)!! I ran out of room as well, but that's beside the point!!!
Your skills, artistry and patience are evidenced in your work and as you've obviously impressed modelmaking legend Martin Bower no less, all three traits are clearly present in spades!!!
Now get back to work so we can all enjoy sign1 !!!

By the way, thanks for the heads-up on Gearz' Nostromo thread: very interesting!

As always, best wishes,

Graham.:killer:
 

dhanners

Active Member
DaDragon makes some very good points. Oftentimes, modeling is about capturing the look and/or the feel of a vehicle, and you have done that -- and more --with this design and build. Only the most anal of rivet-counters will get on your case about the alleged "discrepancies." To my eye, there are none. You've designed and built a model of the shuttle from Outland. Simple as that....

And yes, you're too close to the thing to judge the quality of the work you've done. That's not a dis. We're all too close to our models. I can pull out any model I've ever built and point out some flaw or imperfection. They may be things that are small or insignificant when someone else views it, but to the person who built it, they are bigdamndeals, as we used to say in Texas. Sometimes it's just good to see our models the way others see them.

Rest comfortably in the knowledge that despite what you think about the model, the rest of us are very impressed with what you've done.
 
Thanks Graham and dhanners for the comments. Yes, I see all the flaws, and this model isn't what I'd hoped it would be. But in the end its all good, and I learned a ton doing it, and yes, even had fun. It is a unique subject, and maybe I did bite off abit more than I could chew with this one, but I still like the end result just fine. I have to remind myself that this is the test build. I appreciate you calling BS on my self-deprecating wallow. I'll keep cleaning the layout, and page setups, and tweak those instructions.

Thanks again for seeing the good in her, for ugly tho' she be, she's not a bad vessel after all.
 
Hey folks. Time for me to apologize (again) for the delay in getting this *almost finished* model out the end of the production pipe. I have been busier than I like in RL, with family, business, moving, etc. But I want to assure you this project is not dead yet and I'm really hoping to complete and release it before the end of this calendar year (might be a holiday project for me). I have other projects I'd like to focus on.

Here is some of the reason for the delay. I got sidetracked making halloween costumes from cardboard for my kids. this is also a form of paper modeling, and my small scale paper modeling skills really came in handy when it came to making these suits up. Enjoy.

http://www.youtube.com/watch?v=Y3uVEET0sKs
 

theo

Member
I have bin looking from time to time at the progress on your shuttle.
And I'm happy to hear that it's not dead.

But this video......Hahaa.

Great :thumb: I enjoyed watching that!!
Kids that is what keeps building time low, but also keeping the fun to live!
 

Bubbahearth

New Member
That's true; I truly admire that he's from a generation of true masters of model-craft, when they worked with real materials, designed with pencil and paper, and did everything completely with just their head and hands.

I grew up with that generation of movies, before CGI took over. I have to say, some paper models I've seen (even with flat surfaces with printed-on textures) look more realistic than a lot of the CGI crap now. Funny how something made out of paper can have so much visual weight to it.
 
You should check out the movie "Moon" if you haven't already. Written and directed by Duncan Jones (David Bowie's son) its a good sci fi yarn, but the best is that he went back to old school special effects, using almost all models and sets, and a minimum of CGI. It was very well done, and I loved it for that alone.
 
Top