Building and Kitbashing a Walthers Cornerstone Refinery

TruckLover

Mack CH613 & 53' Trailer
Some Progress Shots

Well this may not look like much as far as progress, but i can assure you that it IS alot of progress lol. Building these 2 parts is prolly the most annoying part of the whole build..... lol. Its not that its difficult in any way, rather simply, just doing the same parts 30 times over gets a little old pretty quick lol. Or having the glue the 64 caps on the pipes or the 28 valve wheels in place..... LOL

anyways, its all done now, i can finally start the fun parts of these kits..... the TOWERS and piping :mrgreen: :mrgreen: :mrgreen:

Heres a couple pics, i also cut the base on one of them so that when there on the layout in the final loacation/home, i can connect them easyly without the base being in the way

SL371637.jpg


SL371638.jpg


SL371639.jpg


SL371640.jpg
 
Josh-I'm really impressed with the model.You've got more patience than I have.Can't wait to see the whole thing finished. Bob
 

TruckLover

Mack CH613 & 53' Trailer
Progress

When i was building the piping and tall stacks when i realized that the main fractioning tower was different from the main fractioning tower on the deluxe kit. i realized this when the piping didnt fit together correctly lol. i had switched the towers out after i had some trouble painting with the spray can and the paint was nearly frozen over night due to leaving it out all night, and i carelessly started to use the can without thinking the next morning :rolleyes: :cry: lol. The paint did not cover well at all and dripped everywhere and ran everywhere lol

Thats when i decided i would just build 4 more towers from one of the other kits and use them for the deluxe build not knowing that they were un fact different.... :rolleyes: I did this because the ones that i had painted with the bad can of paint looked really bad and i even tried sanding them down a bit but i had put the paint on so thick that it wasnt doing much lol. i was also getting very fursterated with this as well which wasnt helping much lol. i set them aside and let them completly dry for a few days before stripping them and re-painting them. i also left the paint in the sun to warm back up lol. Well it wasnt that big of a deal as i thought it would be when i realized i had made the mistake... I was able to pull them apart without damaging the parts luckly, small amounts of glue prooves to be a good thing lol

In the end, the first refinery kit i posted wont be the deluxe one, it will be connected to the other one, and the one im about to post will be the new deluxe one. Nothing is really diferent in the kits besides the fact that the deluxe one has a couple different piping configurations and the brass handrails....

heres a couple pics of the recent progress:

The new Deluxe build:

SL371648.jpg


The furnace for the new Deluxe Build:

SL371651.jpg



The refinery that will be connected to the other refinery:

SL371653.jpg


SL371654.jpg


and the handrails and platforms for it:

SL371652.jpg
 

TruckLover

Mack CH613 & 53' Trailer
Finished with one of the Refinerys

I just got finished with one of the refinery's. This one will be attached to the other refinery and the Deluxe refinery will be in front or to the side of these 2

Heres some pics with the platforms, and railings in place:

SL371655.jpg


SL371657.jpg


SL371659.jpg



And with the ladders in place:

SL371660.jpg


SL371663.jpg


SL371664.jpg


SL371665.jpg


SL371666.jpg
 

green_elite_cab

Keep It Moving!
You better straighten out those ladders! the prototype is mounted straight up!

hehehehe no you dont, just send it my way :mrgreen: :mrgreen: :mrgreen:

Oh, i do all my own work, lol! Would i really being a hobbyist if i let other people do it all for me?

Technically, now that i have my airbrush working, i could start building it. I just wish i had those brass railings.

I'm currently on a journey of insanity, because i decided to start work on my Central of New Jersey wooden caboose, and it did not come with handrails. I've been cutting sections of thin brass wire and using CA to glue things together. I even glued together my own ladder. I think some screws came loose in my head and let some of the marbles out... and i still have to do the other end!

However, i If i can survive that, i might try and make my own handrails from the wire for my refinery.
 

TruckLover

Mack CH613 & 53' Trailer
You better straighten out those ladders! the prototype is mounted straight up!

LMAO, i was going off the box, they show the ladders bent at an angle too.... on the deluxe one, they have ladders with safety cadges around them, so they will all be straight.... :mrgreen:



Oh, i do all my own work, lol! Would i really being a hobbyist if i let other people do it all for me?

Technically, now that i have my airbrush working, i could start building it. I just wish i had those brass railings.

I'm currently on a journey of insanity, because i decided to start work on my Central of New Jersey wooden caboose, and it did not come with handrails. I've been cutting sections of thin brass wire and using CA to glue things together. I even glued together my own ladder. I think some screws came loose in my head and let some of the marbles out... and i still have to do the other end!

However, i If i can survive that, i might try and make my own handrails from the wire for my refinery.

LMAO i was suggesting you just send the refinery to me so i could build it and use it with my other 3 refinery's hehehehe :mrgreen:

sign1I dont know if making the brass handrails would be an easy task, all the platforms ive done look pretty complicated if you would want to scratch build handrails for them lol. but nothing is impossible right? :cool:
 

green_elite_cab

Keep It Moving!
LMAO, i was going off the box, they show the ladders bent at an angle too.... on the deluxe one, they have ladders with safety cadges around them, so they will all be straight.... :mrgreen:

Only one looked like it was really leaning!

Yeah, i was figuring i am going to have to make my own safety cages to. I actually have some spare from my Waltheres Plastic Pellet transfer, but i don't know if that will bee enough, or if it will look right, so i'll just make that out of wire, shouldn't be hard.


LMAO i was suggesting you just send the refinery to me so i could build it and use it with my other 3 refinery's hehehehe :mrgreen:

No way in... well, you get the picture! i payed to much for this, and i've wanted a refinery for too long. its in my long term plans

sign1I dont know if making the brass handrails would be an easy task, all the platforms ive done look pretty complicated if you would want to scratch build handrails for them lol. but nothing is impossible right? :cool:

how complicated could it be? You just need to make a curved wire, and some stanchions, and use a little CA or solder to glue it together? its probably just a bit more tedious then simply gluing those thick plastic pieces on.
 

TruckLover

Mack CH613 & 53' Trailer
Only one looked like it was really leaning!

Yeah, i was figuring i am going to have to make my own safety cages to. I actually have some spare from my Waltheres Plastic Pellet transfer, but i don't know if that will bee enough, or if it will look right, so i'll just make that out of wire, shouldn't be hard.

lol or you could get the safety cadge ladder kit that Walthers has.....




No way in... well, you get the picture! i payed to much for this, and i've wanted a refinery for too long. its in my long term plans

sign1 how much you pay for it and when did you get yours?

how complicated could it be? You just need to make a curved wire, and some stanchions, and use a little CA or solder to glue it together? its probably just a bit more tedious then simply gluing those thick plastic pieces on.

lol i guess your right :mrgreen:
 

green_elite_cab

Keep It Moving!
lol or you could get the safety cadge ladder kit that Walthers has.....

Yeah, but its a bit clunky. I'm sure its fine, but i think wire would do a better job.



sign1 how much you pay for it and when did you get yours?

I got mine when they re ran them this time last year. It was probably close to the full price. before then, i hadn't found the kit, and i never really looked on Ebay for it.

lol i guess your right :mrgreen:

Yeah, i'm a patient man. I will eventually build the thing to amazingness.
 
Top